TSE Feeders

SIDE FEEDER

VOLUMETRIC FEEDER

VERTICAL FEEDER

优化供料。精确的计量。

斯蒂尔设计了容积式供料器和侧向供料器。斯蒂尔进料器保证了从高内聚到联锁纤维等材料的优化进料。供料器以其无噪声和无污染式操作而著称。此外,斯蒂尔也进入挤出机设计了稳定性高和精确的给料的传送系统。

设计和产品特色

对大货材料的了解是的双螺杆挤出机进行有效供料的关键。螺丝必须根据大货材料的类型进行设计，即颗粒状、粘性粉末状、纤维或片状材料。斯蒂尔设计的螺丝适合每一个应用。料斗根据大货材料的特性进行设计,克服了鼠穴和拱起等缺陷。

斯蒂尔侧向供料器的设计适用于各种材料,如玻璃纤维、粉末添加剂、矿物填料等。侧向供料器也可通过侧向排料用于挥发应用程序。侧向供料器具有一定的可调高度,并且便携可移动(通过使用脚轮)。桶和螺丝表面由特殊的工具钢材料制成，经过适当的表面处理可适用于所需应用。配备同向自擦螺旋钉和四缸TEFV笼型交流电动机,由变速控制微处理控制驱动控制。

FEED ENHANCEMENT ELEMENTS

RFV

SFV

SKE

TFV

STEER VACUUM STUFFERS

In a twin screw extruder, vacuum vent is generally located before the metering zone for removal of gases effectively in a continuous manner at lower than atmospheric pressure. This degassing helps to conserve the quality of the melt that is affected by the presence of monomers, solvents, moisture and other volatiles.

Vacuum vent stuffers are used to apply vacuum to the process section to remove gas entrainment in the melt while simultaneously preventing the melt from blocking the vent opening.

Advantages associated with the use of vent stuffers are:

i. Improved volatile removal

ii. Decreased downtime due to vent blockage

iii. Higher quality and / or production rate.

The screws are decoupled from the gearbox output shafts via a connecting zone in the same manner as the extruder. This approach provides the ultimate degree of process flexibility, allowing for specialized configuration of the screw elements. The STEER side vacuum vent stuffer are fitted with high performance gearboxes with thrust bearing assemblies which provides the highest level of reliability and service life expectancy.

Side Stuffers